(SkyNewswire.com) --- Boker's, Inc. announces that the company's extensive washer selection includes fender washers, available in a wide variety of sizes and materials. Fender washers are offered with outside diameters ranging from 0.081 inches to 5.000 inches, plus numerous inside diameter and thickness options. With ready access to more than 2,000 commonly specified and difficult-to-find materials, Boker's delivers fender washers in materials including low-carbon sheet steel, various spring steels, stainless steel, aluminum, brass, copper and nickel silver. Non-metallic material options include ABS, acetal, polyester, nylon, nylon MD, polycarbonate, fiber, polyethylene and various NEMA grade laminates. These fender washer sizes are easily accessible by searching for specific outside or inside diameters at bokers.com/fender_washers.asp.

A fender washer, though similar in shape to a standard washer, differs in that the outside diameter is traditionally much larger in proportion to the center hole. With this design, a fender washer can be placed under the head of a bolt or nut to help distribute forces applied when tightening. Its oversized outside diameter also provides more bearing surface for the load of the fastener--distributing the load further on soft or thin materials. Fender washers are commonly used in automotive, sheet metal, plumbing and electrical applications.

(SkyNewswire.com) --- Trundean Machinery Industrial Co., Ltd., established in 1982, never stop improving their products. Their roots blowers, pumps and diffusers have earned a superior reputation in the blowers industry.

Not only did Trundean Machinery pass ISO 9001 in 2002, but they also obtained CE certification in 2005. Trundean Machinery is committed to maintaining product quality and innovation, production standardization, and strict inspection system, in order to ensure that Trundean's roots blowers, pumps and diffusers can meet all customers' needs.

(SkyNewswire.com) --- PPT VISION's IMPACT 9200 high-resolution camera (1600 X 1200 pixels) is used to inspect the face plate of a car stereo. The vision system is required to inspect the print quality of various text on panels, dials and buttons, as well as logos and labels. The vision system is also required to verify a small ID code located at the top right corner of the face plate. A high-resolution camera is required due to the print sizes compared to the size of the face plate, since a single camera is required to cover an inspection area that is approximately 10 inches wide. When the face plate is loaded onto the inspection cell, a barcode reader reads the barcode and sends the plate model information to the IMPACT device through the serial port. The IMPACT device then loads the corresponding part file and performs the inspection. Once the inspection is completed, the data is sent to a custom Visual Basic (VB) software application through Microsoft ActiveX platform, which in turn links to a database that is part of the manufacturing plant's SQL server.

In order to provide an even coverage over the curved surface of the face plate, the inspection is done in an enclosed box with two diffused bar lights mounted above the part. This is a standalone system with cameras, lighting, optics, PC and various communication and electrical components enclosed. The system is also designed to accommodate additional IMPACT devices within the same inspection cell for additional inspection requirements. The communication links to the SQL server is made possible through custom software and composite tools designed by PPT VISION application engineers.

(SkyNewswire.com) --- Exlar's all electric core pulls provide an easy retrofit to replace hydraulic cylinders for injection molders. The flexibility of the servo system allows the use of the existing hydraulic control switches for a near drop-in replacement. Additionally, servo systems eliminate lengthy start-ups and high maintenance, minimize cycle time and improve throughput.

Exlar offers several families of all electric, servo linear actuators designed to fit and mount in the same space as hydraulic cylinders. Choose from GSX Series, SR Series or FT Series actuators to fit different application needs. The combination of speed and force exceeds performance expectations and optimizes production.

(SkyNewswire.com) --- Remke Energy recently introduced an expanded line of Helio-Link Solar Products for Thin-Film and Crystalline PV panels & arrays. The Helio-Link line includes IP 68 rated field wireable & bulkhead connectors, assembly/installation tools & kits, PV/USE cable, custom cable assemblies, thin-film junction boxes, combiner boxes and grid tie products.

Remke Energy Type 4 Solar Connectors are available in either a bulkhead or field wireable configuration. Our Helio-Link connectors offer several unique features that other 'big name suppliers' do not have including:
Field assembly without special tools
Highest current rating in the industry - 40A
IP 68 rating
Wider cable range - 8 to 18 AWG

(SkyNewswire.com) --- Nexen Group Inc. introduces their new product catalog, containing 386 pages of updated product information from the company's extensive line of precision motion control solutions and power transmission products. As an industry leader in pneumatic clutch and brake technology, Nexen's catalog provides detailed product information and images of brakes, clutches, clutch/brakes, tension control clutches and brakes, servomotor brakes, torque limiters and web tension controls. Featuring updated images, graphics and a user-friendly design, the product catalog allows customers to easily identify desired product information.

The new product catalog features Nexen's air actuated clutches and brakes, highlighting their advantages over electrically actuated units:
- Efficiency: Air does not generate heat during extended clutch or brake engagement. As a result, air clutches and brakes provide greater torque transmission and thermal capacity.
- Productivity: Due to greater thermal capacity, air clutches and brakes have a longer operating life.
- Cost savings: Air clutches and brakes are more cost efficient because it takes less energy to run an air compressor. Air powered components also last longer, resulting in fewer repairs and replacements.

(SkyNewswire.com) --- PPT VISION's IMPACT 7200 high-resolution camera (1024 X 768 pixels) is used to measure the dimensions of extruded plastic parts. The vision system is required to inspect over 100 different part types coming off the extrusion line. The parts can be either black or white in color, and can be any where from 2 to 18 inches in length. The IMPACT camera is mounted on a conveyor station that can be moved among different extrusion lines. Due to the difference in part size, the vision system cannot utilize a sensor to trigger the camera because the sensor would have to be moved to accommodate different part lengths.

The flexibility of the IMPACT software provides a solution where the camera is continuously triggered at an interval of 20 milliseconds. As a part sits on the moving conveyor, the vision program tracks the position of parts center to determine if a new part is in the FOV. When a new part is detected, it measures the maximum length, even if the part is rotated. A custom operator interface panel conveniently displays the measurement of every part. Additionally, it allows the operator to set the minimum and maximum measurement value in calibrated units. If the measured value is between the minimum and maximum value set by the operator, the vision system locks an image on the control panel while the part continues to move on the conveyor before it is placed in the shipping container. If the part fails, the camera turns on an air blower and blows the failed part into the reject bin. Using a "TRAIN" button integrated on the custom panel, an operator can setup a new part by simply placing a test part on the moving belt.

(SkyNewswire.com) --- Micralyne Inc., a world-renowned, independent MEMS solutions company, today announced the appointment of Nancy Fares as President and CEO. Fares brings a wealth of MEMS (Micro-Electro-Mechanical Systems) industry experience to Micralyne. Over a period of 17 years, she held several senior roles within Texas Instruments. Her most recent appointment was with TI DLP Division as General Manager for the DLP Cinema® and DLP HDTV business units. Under Fares’ leadership, the business revenue grew five-fold in five years and secured a 95 percent market share position against a formidable competitor. Customer satisfaction grew at the same time.


Testimony to her pioneering work is the worldwide adoption of DLP Cinema® technology as the dominant digital cinema technology, which enabled the growth of the new 3D movie genre, exemplified by James Cameron’s “Avatar”. Before her role in DLP, Fares started the ADSL Customer Premises Router business, achieving the top two market share positions for Texas Instruments in all major markets. “Ms. Fares’ proficiency at bringing new technologies to the world is proven,” says Michael Welsh, Micralyne’s Chairman of the Board. “Fares’ successes are achieved through her leadership and customer focus, as well as her skill in strengthening relationships both internally and externally and aligning goals with key customers. Her proven track record in growing businesses is an asset to Micralyne. Ms. Fares’ experience, abilities, and leadership will benefit us and, more importantly, our customers.”

(SkyNewswire.com) --- Mountz, Inc. introduces a complete line of shut off and non shut off pulse nutrunners to a growing pneumatic tool lineup branded FlexPower by Mountz. Built for high production environments, FlexPower pulse tools provide durability, power and speed for industrial assembly applications ranging from 4-150 N.m covering bolt sizes M5-M14. FlexPower tools are designed for safe, reaction free operation in straight, pistol and angle configurations with 1/4" female hex and square drive options. FlexPower offers comfortable rubberized non-slip grips for easy handling and excellent thermal ergonomics. Low noise decibels, minimal vibration and low torque reaction make FlexPower a safe ergonomic selection.


These rugged assembly tools increase productivity and enhance product quality through precision torque control and user comfort. The FlexPower Pulse Tools provide operators with an industry leading power-to-weight ratio, allowing for a smaller tool selection for greater torques giving operators a lighter tool with more torque capability. Built for durability with a superior O-ring design and specially designed pulse fluid FlexPower extends life between regular oil changes and provides more torque stability than competing brands.

(SkyNewswire.com) --- The new iTHERM-200™ Thermal Test Station includes a freestanding wind tunnel, an automated wind tunnel controller, sensors and a temperature and air velocity scanner. The system’s large test chamber and eight candlestick-style sensors allows characterization testing on active or prototype boards and racks, including single ATCA, MicroTCA, cPCI and AMC. The iTHERM-200™ includes an eATVS-8 eight-channel hot wire anemometer for consolidating multi-point velocity and temperature readings into a data management program. Also included is a four-channel pressure transducer that measures differential pressure in enclosures where airflow integrity is critical to proper product performance.


To learn about ATS’s family of i-THERM test stations, please see their presentation at our thermal instrument blog thermalanalysis.wordpress.com/ or at their Slideshare channel http://bit.ly/bvlkAZ

(SkyNewswire.com) --- The new products for chemical dispense, chemical blending, slurry dispense, and slurry blend & dispense solutions include:
- Kinetics CD 100 and CD 200 Chemical Dispense Systems
- Kinetics CB 100 and CB 200 Medium and High Capacity Chemical Blend and Dispense Systems
- Kinetics SD 100 Slurry Dispense System
- Kinetics SB 100 and SB 200 Slurry Blend & Dispense Systems


Peter Maris, Kinetics’ President of International Operations commented, "These products are the result of Kinetics’ extensive experience in designing, manufacturing, installing and qualifying critical process systems to meet customers’ tough technical and project requirements. We are proud of the significant differentiating capabilities of our new products related to efficiency, flexibility and reliability. For example, the new Kinetics CD 100 Chemical Dispense System is a low-cost chemical transfer and dispense system that is ideally suited for the Photovoltaic market. The system is simple in design, and easily configurable to provide the optimum levels of chemical flow and purity to meet our customers’ demanding requirements."

(SkyNewswire.com) --- One appliance in the home that is used very often is the washing machine. When it breaks down, it needs to be fixed fairly quickly so that clothes can be cleaned on a regular basis. AM PM Los Angeles Appliance Repair is offering some helpful tips on keeping the washer in good working order so that repairs are not needed too frequently.


Tip No. 1. Front loading washing machines are prone to a build-up of mildew because of the way they are designed. Leaving the door open for short intervals periodically will allow the seals to dry thoroughly and prevent mildew from accumulating, which will also cut down on odors.
Tip No. 2. When it comes to appliance repair Los Angeles, residents are advised that regularly cleaning the lint filters to help keep the washing machine working properly is a good idea. Lint should not be allowed to build up in the filters as this can create a problem with clogging.
Tip No. 3. The washing machine hoses should also be checked on a regular basis for any signs of wear. Los Angeles Appliance Repair advises replacing the hoses every five to seven years to keep everything in good working order.

(SkyNewswire.com) --- Engineers Without Borders Orange County (EWB-OC) participated in a boutique event hosted by the South Orange County Women's Networking Group. The event was held at the Elk's Lodge in Mission Viejo and included over 30 vendors. Orange County women running their own business hosted booths displaying their products from luxury linens to home cooked meal services. Kira Edenhofer, co-founder of the SOCWNG noted "We always enjoy these events, it is inspiring to see the outpouring of support for our charities.". The event was held at the Elk's Lodge event room and was wall-to-wall with various entrepreneurial efforts. Alissa Beale, President of the AM group, said of the yearly event, "We are blessed to have EWB participating as one of our charities this year".


"Our award is a big help and we greatly appreciate SOCWNG including us in their consideration for the award, stated fundraising coordinator, Debra Kennard. "We are thrilled that it will bring us that much closer to raising all of our project costs." On the EWB-OC website you will see a villager up to his neck in muddy water as he wades across from one side of the river to the other. "The bridge is a critical need because it allows the people of Endana to access the Segera Medical Clinic and Middle Schools year round.", said Project Lead, Clay Stevens, an Engineering Geologist. "The river is inaccessible due to flooding when it rains which makes it impossible to pass if you are elderly, a child, or simply cannot swim to access the medical clinic or schools on the other side."

(SkyNewswire.com) --- U.S. Army Tank Automotive Research Development and Engineering Center (TARDEC) and Fort Bliss invited approved vendors to showcase renewable technology. SunPods Inc., a manufacturer of modular, factory-assembled solar energy platforms, provided a live demonstration of the SunPods SP-300 EV Plug ‘N Go Solar Charging station at the Ft. Bliss US Army base on June 8th and 9th. TARDEC and Ft. Bliss co-hosted the Renewable Energy Rodeo and Symposium to establish a foundation for the accelerated deployment of renewable and energy-saving technologies.


SunPods exhibited with other Advanced Technology Vehicle Developers to demonstrate the latest innovations for powering electric vehicles (EV) with solar energy. Up to Pentagon-level military and civilian officials from all US service branches and representatives from the Department of Energy were among the conference attendees.

(SkyNewswire.com) --- It may seem to be very troublesome and unconventional, but you need to realize that there are actually several people who are already taking advantage of having a do it yourself wind turbine. Indeed, this is one of the most practical projects that you can do as it can really help you save a whole lot of cash. This is because you can now produce your own electricity and you will no longer have to rely with the commercial providers. However, you must not also forget that this can also be very advantageous for the environment. This is because with this kind of renewable energy, you are assured that you will not waste nor destroy any of out natural resources.


But despite these obvious advantages, you are still somewhat reluctant to try having your own do it yourself wind turbine. This is because you believe that this is a project that should just be left for the professional and experts. However, there is really no reason for you to think this way because this task is actually very simple. You just need to make sure that you are familiar with the procedures that you will have to go through as well as the concept behind this do it yourself wind turbine.